HEADLIGHT LENS RESTORER KIT

Top Selling Products

HYBRID SOLUTIONS PRO PURE WASH 1.89 LITER

Rs8,556.00 ~~Rs9,200.00~~
ZIP WAX CAR WASH & WAX 500 ML

Rs1,348.50 ~~Rs1,450.00~~
ZIP WAX CAR WASH & WAX 473 ML

Rs1,053.00 ~~Rs1,350.00~~
REDLINE CAR WHEEL CLEANER 500 ML

Rs2,614.50 ~~Rs3,150.00~~
WASH & WAX 3.79 LITERS

Rs5,148.00 ~~Rs5,850.00~~
HYBRID SOLUTIONS CERAMIC WAX 3 IN 1 DETAILER 500 ML

Rs3,738.00 ~~Rs4,450.00~~

Reviews & Ratings

0 out of 5.0

(0 reviews)

Rate this Product

There have been no reviews for this product yet.

Description

Graded sanding pads and fine finish polish restores dull, faded and yellowed headlights.
Active sealant wipes in a 2 step process prevents future fading and yellowing.
Increases beam distance to improve safety levels for driving on poorly lit roads.
Simple application to save on expensive mot re-test and failures.
Headlamp replacements are now a thing of the past

HOW TO USE
PRODUCT DESCRIPTION
PRODUCT REVIEWS
QUESTIONS

STEP 1

Wash headlight surface with a turtle wax shampoo as directed to remove surface dirt. Dry headlight surface.

STEP 2

Use masking tape to protect the painted surface around the headlight.

STEP 3

Apply clarifying compound to a cotton cloth. Rub compound over entire headlight using firm pressure. Buff with a clean, soft, cotton cloth. If headlight does not come clean with clarifying compound, proceed to step 4.

STEP 4

Apply spray lubricant to level 1 green pad and to headlight to be restored. Use pads on only those areas requiring restoration. Begin rubbing the level 1 green pad, using firm finger pressure, in a back and forth motion over the headlight, continuing until much of the oxidation is removed. Use the spray lubricant as necessary to keep the headlight and pad wet (the green level 1 pad will require the longest use).

STEP 5

Immediately switch to the level 2 brown pad. Rub back and forth in the opposite direction (90 degrees) of the level 1 green pad for about 1 minute, keeping the pad and headlight surface wet using the spray lubricant. Switch to the level 3 blue side of the final pad and repeat the process for 1 minute. Flip to the level 4 purple side of the final pad and repeat the process for 1 minute.

STEP 6

Dry the headlight with a cotton towel. Apply clarifying compound and rub thoroughly back and forth until the headlight clarifies. Let compound dry to a haze and buff with a cotton cloth. Clarifying compound can be applied by machine with a foam pad at 1500 rpms.

STEP 7

Important: Clean both lenses before opening the base coat wipe. Open pouch containing the base coat wipe and quickly coat both lenses with the wipe. Once dry, immediately follow with the lens sealing wipe. This helps prevent future yellowing. Coating will dry within 24 hours.

TIPS:

Headlight lens clarity will improve with proper use of this kit. Cracked, micro-cracked, severely pitted, water logged from the inside or severely weathered headlights may not return to the original condition.

Download